Material: Monocrystalline silicon
Size: Approx.23cmx17cm/9.0×6.6 inch
Maximum power: 20W
Maximum protection level: 1.11A
Maximum voltage: 18V
1.Durability, waterproof and longevity.
2.Lightweight and easy to use, and easy to carry.
3.High conversion rate, high efficiency calculation, excellent efficiency.
4.Use overcharge protection, protection in the opposite direction.
5.Small noise, high efficiency.
6.Ideal for outdoor cycling, hiking, hiking, camping, travel, etc.
– Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
– Please understand that colors may exist chromatic aberration as the different placement of pictures.
System voltage: 12V/24V
Rated charging current: 10A/20A/30A
Rated discharge current: 10A
Control method: PWM pulse modulation
Power display: Yes
Light control + delay: Yes
Discharge cut-off voltage: 10.7V (adjustable)
Discharge recovery voltage: 12.6V (adjustable)
USB output: 5V/2.5A*2
Standby current: <10mA
Working temperature: -30℃+60℃
Net weight: 131g
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries).
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
1.Connect the battery to the charge regulator – plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
2.Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
Real customer reviews